Post pics of your ramp....

[Insane]

This ain't my ramp, its a mates, but it is the only ramp I've hit so far... woot what a rush... Post pics of your ramps...

[rm_rider]

thats a nice ramp did he buy it or make it

[Insane]

Made it, with plans from Freerider magazine (Aussie Mag)..

[spana]

thats a nice ramp. me and my friend are trying to build one but we can never get enough time to do it all. argh!

[YAMAHA-KID]

hey there was 2 guys one doin a supa man and the other doin a shinscraper of that in the frmx mag!! it was a while ago

[Simo]

nice ramp insane. I need one just like that! lol

[YAMAHA-KID]

thats make 2 of us..lol

[Simo]

hahahaha if karma was online he would say 3 of us!!

[YAMAHA-KID]

lol too right

[Simo]

nah full on we need sum GOD DAMN JUMPS

[YAMAHA-KID]

yeah,well im ok but i only have dirt to dirt??

[Simo]

YEA BUT I LIKE METAL TO DIRT

[YAMAHA-KID]

good on ya simo..

[Simo]

hell yea

[dirtrider2002]

Here's a pic of my ramp, it ain't metal, but it is a ramp.

[meesh]

the becomings of a ramp;)

[freestyle_rulz]

hey nice, simo i got ur ramp at my place at the moment, its OK. u hit it pretty hard but its awes for pushy n dam dumpin. here she is...........

[mulishatroop]

nice ramps boyz..... wen were the plans in freerider for the aussie comp ramp?

[kx_rider]

i want 1 NOW!!! lol

[1madgerman]

Hey adam this is the newest ramp i built.
lars

[1madgerman]

Another photo.

[freekstyle]

how about posting some dimensions of these ramps
cheers

Freekstyle

[mulishatroop]

yeah thatd be great cheers man

[robson]

how far apart have you guys put the cross struts that run along under the surface???

(i will have my ramp on here as soon as it is finished!)

[gloverfmx411]

my setup, the ramp is still at a small ass gap from when i was trying flips,

[mulishatroop]

did u pull any flips? and could sum1 please post the plans 4 the aussie comp ramp from freerider.... that'd b rippin. cheers

[The Snitz]

Mulishatroop, I wouldn't think scanning the pages from FreeriderMX would be exactly the right thing to do, so what you could do is Email FRMX and ask for the issue with it in.... OR take these 4 little measurements and figure it yourself -
Length - 6.1 Metres
Height - 2.6 Metres
Transition - 9.1Metre Radius
Width - 1.2Metres

Also if you would like all the hard work to be done for you, full ramp plans, amount of steel needed, and fully customised to what you want, simply PM Mungoman45, and I'm sure he'll be able to help you out :)

And no, Scott didn't land the flip, came close but didn't get it

[StUmPnthqldD23]

Mine, Standard aussie comp thanks to the freerider dimensions, Gotta love em!

[Timma_yz125]

wat issue was the ramp plans in

[The Snitz]

Like 10?? Its a very old Issue, has Dayne on the front doing a Rock Solid I think

[Timma_yz125]

o well i dont have that one so yer

[freestyle_rulz]

this is a lil setup, havnt put the gap in yet...

[meesh]

hey freestyle, what size is ya ramp there?

[mulisha_fmx]

yeah what meesh said?

[troop of doom]

heres myn i jsut got today from the welding shop i hadnt seen it untill now i tihkn it looks trick how it goes bigger at the bottom but yeah this is it :D

[troop of doom]

this is the #2 pic i took from side veiw it was hard to get one but it will be finished next week some time so i can hit it soon:D

[troop of doom]

i jsut throught i woudl post up soem of the welds aswell jsut to show that its built right it looks really good
:love:

[zach4161]

thats sick as hell man id love to hit that

[rustyyz]

hey heres my ramp i built last year its a rev 1 design great ramp to jump,

[5th pinned]

Hey guys. this is a pic of my ramp. I bought it off the late Jono Porter. its his first ramp and has been cut down into a tralior ramp. i m really thankfull to jono because if it wasnt for him i wouldnt be riding freestyle so thanks heaps mate and R.I.P

(Cropped, Resized & Reposted)~Mungo :smoker2:

[bentbarz]

heres my ramp

[emotefmx1]

hey dudes i need a ramp do any of use know if any one makes em. those ramps are all soo sweet.:D

[bentbarz]

Australian Ramp Design in Sydney but theyre pretty expensive i would just take it to a welders place and leave it with them it would still be cheaper than ard because they wanted like $2300 or something for a ozzy comp ramp and my friend built the same but the dimensions he wanted for like $1100 but if you dont have time to take it to the welders i would just buy it off ARD.

[Insane]

Ask the pro's though and no ramp is built as good. like or as nice to jump as ARD ramps.. And I aren't just saying that cause I know the ARD crew, the fact is they are the sh*t... While you are out there asking Pro's dont forget to ask Seth, :) one of the reasons he wants to attempt the world record here in Oz is so it can be done off ARD ramps...

Put simply they are Pro Ramps Built By Pros For Pros... Hence they do cost a little bit more, but well worth every cent.... :)

[Mungoman45]

I've heard nothin' but, more than glowing remarks towards the ARD crew, from yourself Adam, Luke Cole on here couldn't put his feelings about them across any stronger or clearer about them being the best ramps in aus built and to use, and from numerous others around the business. I do not doubt this fact at all, and am not trying to say in any way that they're not the best of the best.

However, I just wanna know what makes their way of building so brilliant? Like what do they do differently during the building process that any qualified weilder couldn't do with the appropriate tools, such as a steel bender/roller. It obviously must be something with either the way they physically building them, the steel they use OR the general structual design, if a comp ramp is always done to the exact same specs. Point being, if the transition is rolled perfectly to 9.1 meters, shouldn't all "comp" ramps feel the same?

Now i dont mean to start yet another debate, as the one Luke was involved in, as i stated above, where he couldn't put his point across any clearer about ARD being "the best of the best", but I'm just curious as to what exactly makes them the best of the best?...sort of a "learning lesson" for all those, who wish to make their own ramps, as to how they can go about it any better.

[DirtCowboy]

i m wondering the same thing as brad how does a ARD ramp vary from that of any other comp ramp that are kick around i would have thought that it would be like splitting hairs to say there is a huge difference between them

I suppose the materials that are used on the jump could be variation on that of the standard old ply or the checker plate and the surface would probably make a markable difference but apart from that i really have understanding how they differ to other ramps that are being made in aus if any one can tell us the difference i would greatly appreciative so if any one has ridden ard ramp could share the opinions and the things that they like more about the ard ramps can please point em out to us so if any one maybe spook would tell go right ahead i really curious

[Controversy]

yep, im just as curious as Mungo and Dirtcowboy.

[TwitchFMX8811]

my 8 foot

[TwitchFMX8811]

my 6 foot

[Mungoman45]

Crikey, that 8 footer looks rather anorexic when it comes to supports...is it finished?

[I_Bleed_blue]

yeah i was gonna say that, might break on ya lol

[TwitchFMX8811]

its done. I didnt build it I bought it from a kid who lives close to me. Its really strong ive hit it a couple times and had no problem

[M.r Mulisha]

oi meesh the first pic u put up on tis thread
of ur ramp mine is the same hight and im 11

[METAL_MULISHA13]

M.r Mulisha, stop saying that your 11, youve done it nearly every post and it gets jsut gay LOL...

While im here, ill post one up of mine, the pic aint taken at my place :)

Ramp might seem familar to others, because it was HILLIER's ramp...:)

[emotefmx1]

when r u selling it? how big is it? how much u get it for?

[meesh]

Originally posted by M.r Mulisha
oi meesh the first pic u put up on tis thread
of ur ramp mine is the same hight and im 11

Hey cool man!, sounds like your a little charger, post up some pics, I'd love to see a similar ramp to mine.

[METAL_MULISHA13]

Originally posted by emotefmx1
when r u selling it? how big is it? how much u get it for?

Selling: 2 years time
How big?: 2.2m high, 5.2 long
How Much did i get it for?: $700 cash

There is your info you need ;)

[mulisha_fmx]

whats the point of saying you are gonna sell it dool when u wont be for 2 years ?
And everyone knows its his old ramp so u dont have to put it in CAPS fark

[mulisha_fmx]

Originally posted by 5th pinned
Hey guys. this is a pic of my ramp. I bought it off the late Jono Porter. its his first ramp and has been cut down into a tralior ramp. i m really thankfull to jono because if it wasnt for him i wouldnt be riding freestyle so thanks heaps mate and R.I.P

(Cropped, Resized & Reposted)~Mungo :smoker2:

Sweet looking ramp man im loving it ,
I wouldnt mind making 1
do you have any dimensions for it ?

[METAL_MULISHA13]

yeh well that is what his username is, HILLIER, just to make sure :(

[Slur666]

jp's old ramp looks so nice

[fmr_narlynailz]

sic ramps every1. just on the subject of ramp surfaces has any 1 com up with a way 2 cut down the wear on ya rear tire when useing mesh ramp. i was thing bout angle grinder n lynishing the sharp surfaces (if i spelt it rite a lynishing wheel is like a sand paper wheel that fit on ya grinder)here the best pic i got of my ramp 2 show the mesh i was talking bout :drink: :faceoff:ramp made by the big gun jmb. hope ya heal-n well n back on da bike soon hood

[METAL_MULISHA13]

I dont get why people dont know how to resize there pictures before putting it on here :rolleyes:

[wade2]

learn to resize

[bla_bla]

learn to post some decent posts instead of telling people what to do

[mulisha_fmx]

someone could have done it for him instead of complaining

[fmr_narlynailz]

Originally posted by METAL_MULISHA13
I dont get why people dont know how to resize there pictures before putting it on here :rolleyes: i dont get y people cant just help other people out if they dont know something. instead of being a ****ing big wanker n acting like they know it all.so i dont know every thing n if it such a ***ing big deal 2 u (i know big pics just waste valuable web space fmx.Australia rocks i lov it)maybe u could of just posted up how 2 go bout resizing pic or pointed in rite froam on how 2 crop pic n not wasted the site space with ya horse crap post
p.s i sat there till i worked out how 2 resize so r u happy now:read: :drink: :faceoff: NAILZ