PDA

View Full Version : how to: suspension airbags

thormx683
23rd July 2007, 09:08 AM
hey i have a 1985 mazda b2200 which im in the middle of hotting up and im puttin it on airbags.....on the back its got leaf springs and the front has torshon bars...i know how to lower it i just dont know how/where to mount the airbags?????any help would be sweet!
cheers
!!!Josh!!!
50mulisha
23rd July 2007, 10:38 AM
yeah best bet is to check out www.probag.com.au

they're based in NSW and they got a number ect on the site they even have kits ect for the leaf springs... so check em out they shud set y :Z440: a rite.
Motoswapper
23rd July 2007, 05:59 PM
www.downundertruckin.com if your asking these questions get some who knows what they are doing to do it
horseshoe
23rd July 2007, 06:44 PM
B22k are cool as

but i wouldnt be doing it yourself,
by the sounds of it you have no clue,

you might wanna weld a notch in before - and are u gonna go mono leaf with bag over diff, or are you going to 4 link it?
thormx683
23rd July 2007, 08:20 PM
B22k are cool as

but i wouldnt be doing it yourself,
by the sounds of it you have no clue,

you might wanna weld a notch in before - and are u gonna go mono leaf with bag over diff, or are you going to 4 link it?
well we were going to mono leaf it with bag over diff but i think im gunna get a 4 link pack
Bennett
23rd July 2007, 10:04 PM
Ive built 3 minitrucks on bags from scratch , theres lots of ways to mount the bags in trucks. You need to have a notch and bridge with top and bottom bag mouths in the rear , but thats a basic way of doing it.

Downundertruckin or ZAminis is the go.
thormx683
7th August 2007, 07:31 PM
yeah well i have an idea which im not sure would work but...if ya made brackets and mounted the airbags next to the shocky and when the airbag is deflated it pulls the chassie and the shocky down??? just askin to see if it would work so???
twisties
10th August 2007, 05:19 PM
Ive built 3 minitrucks on bags from scratch , theres lots of ways to mount the bags in trucks. You need to have a notch and bridge with top and bottom bag mouths in the rear , but thats a basic way of doing it.

Downundertruckin or ZAminis is the go.

bennet is definately the man to be asking.
monoleaf is bad, dont do a cheap job cause you will not get it engineered