Pipe, meet muffler, muffler, meet pipe!! Help!!

[Yammi_man]

ey guys,
Just wondering if someone could give me an idea how to fix this problem...

As you can see in the foto, where the pipe and muffler join, its leaken shit everywhere, as u can see on my frame and spring. After a days riding my leg and swingarm is covered in black!! Ive been told u can use a heat proof glue to seal it up but i still want to be able to pull apart my pipe and muffler. Also can u buy a new proper joining part for that? If not, or if theres a cheeper solution... Can u let me know??

Thanks guys
Adam

[GStylEr]

You most certainly can get that seal replaced! I've bought at least 2 for my CR since I got it... and I need another one because the muffler cut the seal when I put it back on last time so it's leakin everywhere again! Mine still leaks with a new one unless I ziptie it tight at both ends, which is what I do. I think the seal for a '00 CR250 cost me $10 or so. Should be around there. If they can't get you one at the shop get some rubber sleeving, same thing, and just seal that however you see fit.

[Yammi_man]

Thanks for that man, i might look into that some more, make a few fone calls!! I Have used one of my own rubber seals, in fact, an old bike grip cut to size, that works for the first few rides untill it gets hot and starts to melt rubber everywhere and eventully eather melts away totally, or melts on there, which as a pain in the ass to get off again!

Thanks man
Adam

[hardkau]

go to your local bike $hop and pik up a new $eal, (not a handgrip =)) , and wak a bit of high heat $ilicon around the $eal when ya put it on. problem $olvered

[kyle]

just silicon it up then before you do that put some heat shrink on and heat so it shrinks on and zip tie both ends and problem solved for ever pretty much.:)

[FoXRaCiNG]

i'm startin to get that prob too!!

[crustydemon_69]

change your oil brand. TTS always did that to me, but now on R2, no more excess

[dave250]

iv got the same thing on the rm just took the rubber off last night
i was going too get a piece off heat resistant hose and hose clamp both ends but if you can get em cheap i will just get a new one

[Lee_250f]

yeh thats a paint in the arse especally when u got a white frame.yet to do it to my bike but im gunna just whack on a heat shrink and then ziptie the ends of it

[gad]

sorry mate i have no idea

[penuts]

i have no problem on my bike and i run tts i reckon its the best oil no smoke on startup and i havnt fouled a plug in agers theres also a rummer seal that u can get that goes over the top of both of them my mate stooza has on on his 01 cr and that does the trick

[DTguy]

use a cut rad hose, and pipe clamps

[dave250]

went to about 3 bike shops $60 was the best price said **** that
so yeh what DT said just went to super cheap brought a radiator hose choped some off think it the top one of a sigma and just hose clamped it on ehter side cost about $10 and i still have heaps of hose left over for next time

sweet